Author: Joe

  • Golf IV TDI Temperature Sensor

    Golf IV TDI Temperature Sensor

    Don’t buy cheap VW temp sensors. I bought a £6 sensor from eBay and I got this fault appear in VAG-COM along with “Emissions Workshop” on the dash. 17664 – Engine Coolant Temp Sensor (G62): Open or Short to Plus P1256 – 35-10 – – – Intermittent The black sensor on the left is the…

    Continue Reading →

  • Golf MK4 TDI Turbo Rebuild

    Golf MK4 TDI Turbo Rebuild

    The Golf was suffering from yet more issues recently in the form of a worn turbo. This became apparent when a whirring sound could be heard when accelerating. I decided to replace the CHRA unit which is basically the core working part of the turbo and the vacuum actuator while I’m there. I thought it…

    Continue Reading →

  • VW Golf TDI – PD Engine Issues

    VW Golf TDI – PD Engine Issues

    I bought a MK4 Golf TDI last year, the 150 BHP version. Everything looked good on paper and it test drove well. I know that they suffer with camshaft issues but this one had a new camshaft installed fairly recently with some work done to the injectors also. It had all the extras I wanted,…

    Continue Reading →

  • Berlin Marathon

    Berlin wasn’t the first destination that came to mind when I started to think about which marathon to do next. My friend Luke had already decided he was going to attempt it so I said I’d do it with him. Some months later and Luke had to drop out, he had back issues and they…

    Continue Reading →

  • Triumph TT600 Throttle Balancing

    Having spent a while reading about the throttle bodies on the TT600 I decided to have a go at balancing them. The TT600 suffered from problems on day one with dodgy fuel mappings and lumpy running at low revs. This was improved over the years and was mostly ironed out with better maps but on…

    Continue Reading →

  • Head Work

    The diff is on hold until I can get hold of a pinion depth shim that’s on backorder so I decided to do some work on the cylinder head. Having read a fair bit about porting and polishing I thought I’d give it a go. There’s loads of videos on the subject on YouTube. Some…

    Continue Reading →