ClassicCAN is an open-source display interface that is compatible with the OBD II protocol and fits inside a classic Smiths Instruments 2″ gauge. I had the idea for this project when I added CAN support to my Juice Box ECU. I wanted to retain some of the original gauges in my Triumph Spitfire but also …
Juice Box 2 is an open-source full engine management ECU designed around the Speeduino project. Taking the development of the Juice Box to the next level, I designed this fully-fledged Engine Management ECU to convert my Triumph Spitfire to fuel injection. With robustness as the primary aim, Juice Box 2 features a robust design and …
WBO2 is an open-source, wideband O2 controller for use with Bosch LSU 4.x sensors, based on the Bosch CJ125 chip and an ATTiny1614 microcontroller. I designed this to complement my ECU for my Triumph Spitfire restoration. Using a Bosch wideband oxygen sensor, it measures the air to fuel ratio of exhaust gases and outputs a …
Juice Box is an open-source, programmable ignition controller designed around the Speeduino project. It is a DIY/low-cost alternative to mainstream ignition controllers on the market with the advantage of having additional IO for logging & tuning purposes. I designed this ECU as part of my Triumph Spitfire restoration to convert it to a programmable electronic …